Because the automatic winding machine manufacturer does not need manual operation, so the operator's professional requirements are higher. In order to adapt to the coil processing technology, the automatic winding machine is equipped with spindle speed regulation function, and the types of winding machine should be different. We are familiar with the type of spindle motor is AC motor, DC motor, servo drive motor. The speed control methods used by these motors have their own characteristics. Speed control method of weighing automatic winding machine:

The speed control method of AC motor itself does not have the function of speed regulation. It is necessary to realize the speed regulation function by means of electromagnetic speed regulation equipment or adding frequency converter. In winding equipment, we use winding equipment in frequency converter speed control method is more common. The control system controls the frequency converter so that the motor has the function of speed regulation. This method also has certain energy-saving effect.

The speed control method of DC motor needs to convert the supplied power into DC power to drive the motor. Therefore, DC motor is equipped with DC speed control board or brushless driver to drive and control the motor. Small motors are used in small winding equipment. A large number of.

The speed control method of servo motor belongs to precise moving parts and is suitable for high precision winding equipment. It is used with special drivers to achieve closed-loop operation control. One of the main characteristics of this type of motor is constant torque, closed-loop operation, which is used for high satisfaction. Processing requirements for precision coils.

Automatic winding machine factory's automatic winding machine generally has several common functions such as preset, active stop, positive and negative winding, active cross groove, etc. In actual use, the first thing to pay attention to is winding the slow train first and stopping the slow train, the function of starting and reducing the slow train is the slow running after the equipment starts. The aim is to reduce the impact on tensile structures and enameled wires. Depending on your needs, you can generally set it to 1 to 3 circles. The stop slow function is that the device runs at a low speed before completing the chain sequence. This function can reduce the impact on the brake, so that the equipment winding winding smoothly, especially the need for accurate positioning of the winding technology. This parameter must be set based on the speed of the device. The difference is that the parameters should be adjusted accordingly. General situation is 2 to 5 turns, again is the direction of the cable and the direction of the winding. These two parameters are the cable displacement direction and spindle rotation direction Settings.